Battery EEPROM
Works
硬件
be2works硬件编程器是基于飞利浦 I2C并口适配器设计的
Socket P1 is used to connect 24C0X chips,
P4 is used to connect 25LC040 and M95640. Other supported chips must be
connected to sockets P2 or P3 depending on package. The fastest way to find the
right socket (P2 or P3) is just to try to read the chip.
R7, R8, D1 and D2 are used to protect
adapter and LPT port from overvoltage.
PCB design for single sided board can be
found in your installation directory .
笔记本电池解锁工具软件
